This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #11  
Old 06-08-2011, 11:30 PM
1965TbirdMan's Avatar
1965TbirdMan 1965TbirdMan is offline
Apprentice
 
Join Date: Mar 17 2010
Posts: 77
1965TbirdMan is on a distinguished road
Default So close

Ok well i got the all the parts back on and the motor runs great. However I do have one issue right now the shift lever says i am in park but tires are spinning. When I moved it before i put the motor in i went to put it in park and a spring came shooting out of the shifter column. I know i have some type of either shifter issue or linkage. I looked under the car and the linkage column is moving around when i move it through the gears but it might not be working at the transmission. I think i checked that. Also it might be the dent plate issue. I ordered all that stuff figured it wouldnt be a bad idea to fix it. Also the throttle rides back like someone is pressing the gas down when no one is. I might have done something when i put the motor in or out. Maybe im missing a spring. I know this is alot but its real close to having this baby back on the road so any advice would be awesome.
Reply With Quote
  #12  
Old 06-12-2011, 01:20 AM
1965TbirdMan's Avatar
1965TbirdMan 1965TbirdMan is offline
Apprentice
 
Join Date: Mar 17 2010
Posts: 77
1965TbirdMan is on a distinguished road
Default

Well engine is running and got alot of the issues fixed. I need to fine tune the carb and maybe timing it likes to stall alittle when in gear. I am going to look in my book but does anyone have a good diagram for all the vacuum lines like where they run to and everything trying to get this baby running great and this seems like the next step
Reply With Quote
  #13  
Old 06-12-2011, 07:07 AM
redstangbob redstangbob is offline
Experienced
 
Join Date: Feb 18 2011
Posts: 217
redstangbob is on a distinguished road
Default

Check your email good luck, Bob C
Reply With Quote
  #14  
Old 06-13-2011, 06:29 PM
1965TbirdMan's Avatar
1965TbirdMan 1965TbirdMan is offline
Apprentice
 
Join Date: Mar 17 2010
Posts: 77
1965TbirdMan is on a distinguished road
Default close again

Ok. Runnig good but when I press brake pedel down it doesn't want to come back all the way. No hole in line and has new lines and everything seemsprettt new on brakes all around. Wondering may alittle air in line? Brakes work they stop and have tension when pushing pedel just doesn't want to come back any ideas?
Reply With Quote
  #15  
Old 06-13-2011, 09:36 PM
redstangbob redstangbob is offline
Experienced
 
Join Date: Feb 18 2011
Posts: 217
redstangbob is on a distinguished road
Default

I had that problem before I pulled the booster for underhood restoration. I found the pivot pins behind the bracket really rusty. Try spraying the pivots in the bracket behind the booster. Good luck, Bob C
Reply With Quote
  #16  
Old 06-16-2011, 10:13 PM
1965TbirdMan's Avatar
1965TbirdMan 1965TbirdMan is offline
Apprentice
 
Join Date: Mar 17 2010
Posts: 77
1965TbirdMan is on a distinguished road
Default Turn signal/ brake light issue

Will work on booster this weekend i hope. But was taking it for small spin and the turn signals and brake lights stopped working I had a bad backup light fuse and i changed it and they worked. But after driving the car for a little bit the lights for turn signals stoped and seeing how the brake lights are tied into that they stoped to. Maybe it is the circut breaker that is in the fuse panel. Maybe if a fuse goes bad in the fuse panel then they wont work? Or a wire gets to hot gets over loaded and shuts off. Any thoughts if its the circut breaker where do i get one? Autozone had some but they had a big metal bar that goes across the back like its to be mounted to something not to go into fuse panel. Any help would work its a bit dangerous driving with no turn signals or brake lights dont feel like getting the finger a million times in such a classy car.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 04:15 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.