This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 10-11-2009, 11:09 AM
430bird60 430bird60 is offline
Apprentice
 
Join Date: Dec 30 2008
Posts: 71
430bird60 is on a distinguished road
Default a/c vent removal

I have a nice a/c vent that I want to put in my 60 but I am having a hard time removing the one I want to replace. I can't get it separated from the cardboard tube. All the hardware is off the front and it moves but I can't see how it attaches to that tube. I assume once disconnected the vent should come out from underneath the dash. Can anyone help me? Thanks

Ken
430 sunroof
Reply With Quote
  #2  
Old 10-11-2009, 12:31 PM
YellowRose's Avatar
YellowRose YellowRose is offline
Super-Experienced and a HELLOFA nice guy
 
Join Date: Jan 21 2008
Posts: 11,938
YellowRose is on a distinguished road
Default a/c vent removal

Hi Ken,

Your AC vent is probably taped to that cardboard tube. Mine was. In fact, someone, in the past, had been in there and it looked like they made a new tube. Rich had to take out the radio and get up in there with his hand and peel off the tape to get the vent out. That freed the vent to come out. Then he got the cardboard tube out and found that it was stuffed with junk. We found balled up duct tape, a piece of scrunched metal from who knows what, and several other things that I have forgotten about. Then he made a new tube out of cardboard because the one he pulled out was pretty shot. He put the new tube in place, and taped it down with duct tape. Then he slid the vent back into place inside the new tube. He mated them together outside the car first to make sure it was all going to fit together. After he got it all back in, sealed and mated properly, he put the radio back in. I just talked with him on the phone to make sure I did not miss anything. I asked him if he had to unscrew anything to get the cardboard tube separated from that tube. He said not that he remembers, that the tube was taped to the vent hood, and also the tube was taped to the inner vent system.

Since then, while I had Rose in the shop, they made a tube out of metal and replaced that cardboard one.

Hope this helps you!
__________________

Ray Clark - Squarebirds Administrator
'59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
"It's Hip To Be Square"
Thunderbird Registry #33025 VTCI #11178

rayclark07"at"att.net (Home) 210-674-5781 (Cell) 210-875-1411
http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #3  
Old 10-11-2009, 02:22 PM
Ca58tbird Ca58tbird is offline
Super-Experienced
 
Join Date: Apr 27 2008
Posts: 601
Ca58tbird is on a distinguished road
Default

Ken, it's been many years since I had done my vents, but do maybe recall that the original cardboard tubes were stapled to the vents. I think that the cardboard was so rotten that the staples no longer held the cardboard in place to the vents, but when I put new fiberglass tubes in (that I had made) I took a pliers and yanked the staples out of the vents so the tubes could slide flush on. I may have even re-stapled my new tubes back onto the vents. The staples used would be the same staple type as are used elsewhere on the car such as to fasten rubber onto metal (ie; splash guards shields and fender skirt gaskets).
__________________
Best Birding,
Jed Zimmerman
'58HT and '48 Dodge Panel in MN
Thunderbird Registry #3810 VTCI#7652
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 03:11 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.