This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 08-21-2009, 01:08 AM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,129
simplyconnected is on a distinguished road
Default Brake Switch Retrofit (hydraulic to mechanical)

I put something together for you guys who are tired of changing your brake switch (mounted on your master cylinder). Guys using DOT5 are well used to changing them as the fluid attacks the switch and renders it useless. (Then the brake lines must be bled.) For looks, you can leave the old switch and add a new mechanical switch at the brake pedal.

My ideas aren't new. New cars use a switch at the brake pedal, and they usually energize a relay to turn on the brake lights.

I am in the process of changing my '59 Galaxie from a 3-speed column stick, to a column shift Cruise-O-Matic. In order to do that, I have to change the steering column and brake pedal support. Conveniently, I have both ready to go in.

This topic was already discussed (briefly) HERE.

Since then, I improved my mounting and switch choices, and applied them to the 'new' brake pedal support for the automatic. Check this out:
http://home.comcast.net/~simplyconne...ch/default.htm

If you have any questions, comments, or concerns, I welcome all of them.

Yesterday, I pulled my 292 Y-block,



tomorrow the steering column and brake pedal support are coming out.



Hey, you only go around once. - Dave Dare
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:39 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.