This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
Prev Previous Post   Next Post Next
Old 06-04-2009, 07:06 AM
JohnG's Avatar
JohnG JohnG is offline
Join Date: Jul 28 2003
Posts: 2,247
JohnG is on a distinguished road

Prior to setting the puller up, you can possibly loosen things up a bit in the following way: pull on the wheel with one arm wrapped around it while taking a modest ball peen hammer and giving the threaded shaft that the nut came off of a few taps. Don't overdo it and damage the threads on the shaft. If you have a friend to help, this is good. One can pull on the wheel and the other tap.

You could also put a spare nut on the very end of the shaft and hit that. The threads will be protected while the nut doesnt matter.

The basic idea is the shock of the hammer strikes may break some of the bonds holding the steering wheel on. Kind of like a poor man's impact gun. Basically the same method you might use to get the flywheel off of a push type Briggs and Stratton lawn mower.


Last edited by JohnG : 06-04-2009 at 11:01 AM.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 05:42 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by