This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 06-04-2003, 11:37 PM
roadpatrol's Avatar
roadpatrol roadpatrol is offline
Apprentice
 
Join Date: May 17 2003
Posts: 43
roadpatrol is on a distinguished road
Default hood latches

I have a `60 hardtop and the hood latches wont release ,the
cable works the latch but it seems like it wont move the
release far enough to release the hood. Is there any way
to adjust it?Its bothering me because I have to keep my hood
popped and it`s been raining every day. This car means alot to
me and it would suck if the rain got in the hood opening and
rusted something important.And yes I plan on buying a car cover
but until then...drip drip:(
__________________
Rick
60 Hardtop
Reply With Quote
  #2  
Old 06-05-2003, 09:47 AM
Monty Monty is offline
Apprentice
 
Join Date: May 14 2003
Posts: 50
Monty
Default RE: hood latches

I have the same problem and I am working on it.
1. since my car paint is old I washed out the latches with brake cleaner and removed all the leafs and junk and hard grease.
2. After it drys spray silicone or WD40 or PB Blaster etc on the works and along the cables to penetrate the cable and loose the rust and grease up.
3. With someone holding in the knob loosen the cable stop screws and pul the wire tight with plyers and retight the screw this will take the slack out. Just like on a brake cable.
Most important is reducing the fiction and tension of the latch to make sure it releases the hooks.
The springs seem to do their job of returning and locking so I don't see them as the problem.. its get the draw distance of the cable longer. Hope this help. Also to help the hood against the latch lub up inside the hood hinge this helped me in ten minutes
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:10 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.