This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 08-22-2007, 07:24 PM
bestpaintandbody bestpaintandbody is offline
Newbie
 
Join Date: Aug 8 2007
Posts: 11
bestpaintandbody is on a distinguished road
Default fuses on headlight switch?

What are the fuse sizes on the back side of the switch?
Reply With Quote
  #2  
Old 08-22-2007, 09:18 PM
Alexander's Avatar
Alexander Alexander is offline
Webmaster
 
Join Date: Oct 30 2002
Posts: 3,338
Alexander is on a distinguished road
Default

The fuses are SFE-7.5 for the interior dome light and 1AG-5 for the turn signals.
__________________
Alexander
1959 Hard Top
1960 Golde Top
Reply With Quote
  #3  
Old 05-17-2010, 10:32 PM
Dakota Boy's Avatar
Dakota Boy Dakota Boy is offline
Super-Experienced
 
Join Date: Jun 30 2009
Posts: 1,501
Dakota Boy is on a distinguished road
Default

Well.... here's an interesting discovery:

My shop manual for my '58 says the headlight switch only has one fuse on the back (the dome light fuse). It also states that for the turn signals, the '58 should have an in-line cartridge-style fuse holder with a 7.5 amp fuse inside.

However... my headlight switch must be from a '60 because there are TWO fuses on the back of it. The dome light fuse was the proper 7.5 amp fuse. The turn signal fuse had a 20 amp fuse in it...tracing the wire to the flasher pod....I found a cartridge fuse holder that had a 7.5A fuse in it.

Now here's the question:
What to do now for my turn signal circuit?
1. Put a 7.5 amp fuse in BOTH locations?
2. Put a 5 amp fuse in the headlight switch and just remove the cartridge fuse altogether?

I DO know that the 20 amp fuse will NOT be re-installed.
Reply With Quote
  #4  
Old 05-17-2010, 11:06 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,162
simplyconnected is on a distinguished road
Default

What are all fuses designed to protect? The answer is most obvious, but most people get it wrong. That's why you see huge fuses in circuits where they don't belong.
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
  #5  
Old 05-18-2010, 09:53 AM
Paulie9fingers's Avatar
Paulie9fingers Paulie9fingers is offline
Apprentice
 
Join Date: May 3 2010
Posts: 44
Paulie9fingers is on a distinguished road
Default

If you have two fuses on the same circuit, it really doesn't matter how big one of them is as long as the other one is the correct size. The 5 amp fuse will blow first just like if the 20 amp fuse wasn't there and the circuit was wired straight to the 5 amp fuse.
__________________
" If my calculations are correct, when this baby hits eighty-eight miles per hour ... you're gonna see some serious sh*t. "

Dr Emmett Brown, 1985
Reply With Quote
  #6  
Old 05-18-2010, 10:23 AM
Dakota Boy's Avatar
Dakota Boy Dakota Boy is offline
Super-Experienced
 
Join Date: Jun 30 2009
Posts: 1,501
Dakota Boy is on a distinguished road
Default

My '58's Shop Manual says the current draw on the turn signal circuit is "0-4 amperes". So I'm going with the 5 amp fuse at the back of the headlight switch, and splicing out that goofy little cartridge fuse holder.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:06 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.