This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 09-24-2017, 01:47 PM
nobadlie nobadlie is offline
Newbie
 
Join Date: Jul 25 2017
Posts: 8
nobadlie is on a distinguished road
Default 64 brake conversion

My question two fold.

I want to convert my 64 drums to dics front and back.

what is the skill level needed to do this? (I've never done a conversion) and how hard is it to do?

Or should I have a shop do the work?

Ok so it's three fold

Thanks,
Reply With Quote
  #2  
Old 09-24-2017, 01:54 PM
jopizz's Avatar
jopizz jopizz is online now
Excellent Auto Mechanic for over 40 years.
 
Join Date: Nov 23 2009
Posts: 4,836
jopizz is on a distinguished road
Default

There are kits available to do the front disc conversion so that is certainly a do it yourself job. However adding rear discs is another story. There aren't any over the counter kits that I know of so it will take a lot more technical knowledge and equipment to do it than the average home mechanic has. Since the fronts do most of the braking putting discs on the rears is not going to give you much better performance.

John
__________________
John Pizzi - Squarebirds Administrator
1959 Convertible

Thunderbird Registry #36223
jopizz@verizon.net 856-779-9695

http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #3  
Old 09-24-2017, 02:04 PM
nobadlie nobadlie is offline
Newbie
 
Join Date: Jul 25 2017
Posts: 8
nobadlie is on a distinguished road
Default

Thanks John
Reply With Quote
  #4  
Old 09-24-2017, 06:38 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,121
simplyconnected is on a distinguished road
Default

I agree with everything John said but I want to add this:
There is a learning curve involved with bending brake line and using an inverted flaring tool.

If you're the type that sets his car on fire while doing an oil change, let a mechanic do this job. It requires patience, some skill and common sense.

The type of brake line you buy makes a huge difference in the quality of tools needed to do a proper job. I suggest using CUNIFER (copper/nickel/iron) brake line for two reasons. It doesn't rust and it bends and flares like butter. The cost is higher but well worth it AND inexpensive (Harbor Freight) flaring tools work just fine.

After making two or three 'test' flares, you should be a pro. I did a video about this... CLICK HERE
Many of our members have proved, you can do this job. Think ahead and have patience. If you start making mistakes, quit. Come back after taking a break when you're relaxed.

My wife's 2010 Escape came with rear drum brakes. They work just fine.
Brake kits are 'bolt-on' so they are pretty straight forward. The only 'custom' work required is the brake line and your initial booster adjustments.

Hope this helps. - Dave
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:31 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.