This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 05-10-2017, 04:53 AM
mh434's Avatar
mh434 mh434 is online now
Apprentice
 
Join Date: Jan 10 2017
Posts: 55
mh434 is on a distinguished road
Default Leaf springs

So, first time up on the lift at the weekend and time for a quick peek underneath (with a degree of trepidation wondering what I would find, but all looks reasonably good if a bit grubby). It has air shocks, although I have yet to find the valve, and the shock bottom mount has been modified to accept a different fixing. I am curious about what look to be thumb turn clamps on the leaf springs. Not seen them before, any ideas ?

Jon
Attached Images
File Type: jpg SAM_0342.jpg (138.8 KB, 51 views)
__________________
Jon
Deepest Hertfordshire
Old enough to know I'm right...
1960 Hardtop T'bird
1961 Hotchkiss M201
Ex-Army Land Rover
Reply With Quote
  #2  
Old 05-10-2017, 10:19 AM
Yadkin Yadkin is offline
Banned
 
Join Date: Aug 11 2012
Posts: 1,910
Yadkin is on a distinguished road
Default

The thumb screws look like hose clamps from the mid 70's. The thumb screw is a worm gear that acts on slots in the steel band to tighten the clamp. Some genius used these around a rubber covers to keep the leafs aligned. Apparently it worked.

Modern versions of these hose clamps have a band, holder and worm screw with a 5/16" hex drive. I buy them at Lowes, all stainless steel. I use them for a lot more than just hoses. For instance, my coil is secured to my engine bay with them.
Attached Images
File Type: jpg IMG_20170510_091957707.jpg (36.9 KB, 43 views)
Reply With Quote
  #3  
Old 05-10-2017, 10:56 AM
DKheld's Avatar
DKheld DKheld is offline
Super-Experienced
 
Join Date: Aug 27 2008
Posts: 1,443
DKheld is on a distinguished road
Default

Thumbscrew clamps with rubber possibly for anti-rattle?
(just a guess)

Also looks as if someone has extended the draft tube to the back of the car - not a bad idea.

Eric
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 03:45 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.