This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 01-22-2017, 09:10 PM
YellowRose's Avatar
YellowRose YellowRose is offline
Super-Experienced and a HELLOFA nice guy
 
Join Date: Jan 21 2008
Posts: 11,831
YellowRose is on a distinguished road
Default Taking Gauges Out

Someone recently asked me for information on taking the gauges and controls off the instrument panel and I do not remember who that was. Anyone wanting to do that should take a look at the Technical Resource Library. In it, there are these instructions. Dash Pad Installation 1958 1959 1960 Thunderbirds 1958 - mid-year 1959 Thunderbirds. In those instructions, which have primarily to do with replacing the dashpad, there are also instructions on how to get the gauges out and the control knobs out of the instrument panel. Check it out and see if that helps you. Just click on the link in my signature element to take you to the TRL.
__________________

Ray Clark - Squarebirds Administrator
'59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
"It's Hip To Be Square"
Thunderbird Registry #33025 VTCI #11178

rayclark07"at"att.net (Home) 210-674-5781 (Cell) 210-875-1411
http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #2  
Old 01-23-2017, 01:30 PM
DKheld's Avatar
DKheld DKheld is offline
Super-Experienced
 
Join Date: Aug 27 2008
Posts: 1,432
DKheld is on a distinguished road
Default

http://www.squarebirds.org/picture_g...shpad58-59.htm

(starting at step 6)

The bezels or surrounds for the instruments are usually stuck pretty hard.

Found using some of those gloves with the "grippy dots" helps.

Pull straight out on the gauge surround or you risk snapping off one of the pins that holds it to the dash. Those pins get dust/corroson on them and you may need to put a drop or two of oil on them to work them loose. I used a drop of oil on the end of a q-tip to get the oil back there. You can start on one - get it a little loose then move around to the next until they are all loose and the bezel/surround will pop off.

Just had the headlight switch and ignition switch out this weekend (dome light was staying on).

Push pin for releasing the headlight switch shaft is to the right looking a the dash from the drivers seat. A good sized screwdriver should unscrew the center chrome round part which is threaded into the headlight switch.

The ignition switch is a royal pain to get back in if the spring is still in good shape and not flattened. I found a penny to be a good tool to remove the center chrome bezel which holds the switch to the dash. Even the largest screwdriver I had would hit the switch and not turn or get caught. The penny only contacts the center bezel.

Caution!!!! this bezel is 1/4 turn only - do not try to unscrew it like the headlight switch or it will be ruined. Push the switch out toward you from the back of the dash and the center bezel will stick out - then use the penny to turn it 1/4 turn counter-clockwise to release. As I mentioned putting it back in will be the hard part. You need to push out on the switch while at the same time push in with the bezel and penny then turn 1/4 turn cw to lock. Mine locked only one side 5 or 6 times until I finally held my mouth right and it worked.

It's a lot easier to have the temp and fuel gauge already out when trying to remove either of these switches.

Eric
Reply With Quote
  #3  
Old 01-25-2017, 05:25 PM
sidewalkman's Avatar
sidewalkman sidewalkman is offline
Experienced
 
Join Date: Sep 14 2015
Posts: 291
sidewalkman is on a distinguished road
Default

Only thing to add is when taking the temp and fuel gauges out is to mark what wires go where, take a picture makes it easier and right before you put them back in reach in and down to make sure the oil light and bulb for the lights in the light ignition surround haven't been knocked out, it's way easier to get at them before the gauges go back in.
__________________
Scott
South Delta, BC, Canada
1960 White T-Bird, PS, PB that's it
Red Leather Interior!
www.squarebirds.org/users/sidewalkman
Thunderbird Registry #61266
http://www.squarebirds.org/picture_g...ibrary/trl.htm
Reply With Quote
  #4  
Old 01-26-2017, 01:12 AM
Djweaz's Avatar
Djweaz Djweaz is offline
Apprentice
 
Join Date: Apr 14 2016
Posts: 73
Djweaz is on a distinguished road
Default

It was me Ray. Thanks Dave Dare dropped me a line letting me know about it. I didn't see it in Chapter 12-1. Hoping to get the bird back either tomorrow or Friday and will be trying this. I had tried it before but it was stuck and I was worried Ibwas doing it wrong and didn't want to break them
Thanks Scott and Eric I appreciate it. I have working gauges under the dash someone cut out holes in the trim panel under the dash andmy fuel gauge is directly under the keys. I need to get it wall out and see if the CVR(I think I got that right). It is probably bad and is the reason other gauges were installed. I have an amp gauge, which I don't like would rather have a bolt gauge. I never understood how amp gauges read. My oil, temp and I'm forgetting the 4th besides the amp gauge. I have to slide down in he seat and turn my head sideways to see them. My fuel gauge is a bouncer so I have to check if I have a to see if I have a wire loose. My speedo cable I think I can hear it moving but the needle is in my ash tray so I want to get in working order as well. Would be neat if the clock works once I get it all figured out.

Rob
__________________
Rob
1959 Thunderbird J-Code
Tbird registry
#15794

Last edited by Djweaz : 01-26-2017 at 01:27 AM. Reason: Had somethings else to add
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:38 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.