This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 07-24-2005, 09:35 PM
uncleotis63 uncleotis63 is offline
Newbie
 
Join Date: Sep 2 2004
Posts: 3
uncleotis63 is on a distinguished road
Default 400HP 390cid.

I'm soon dropping off my bullet to a custom painter for a custom paint resto. While out of it's box, I'm going to dress up my original 390cid. With this, I wanted to mildly mod it in hopes to get at least 400-450 HP. I had it rebuilt about a year and a 1/2 ago only to get it back on the road. It still had the soft valve seats and smoked like a hippie. I'm afraid of getting taking advantage of as I don't know what to ask for other than give it some more ponies. I know this barge will never be popping wheelies but I'd like to get it out of the box a little faster. I've already got some headers and piping to the two new magna flows in the garage waiting for reassembly. I'm sure that'll help but what else can I do on a limited budget that is going to the paint shop.
thnx.
Dr. Otis.
Reply With Quote
  #2  
Old 07-25-2005, 10:08 PM
Alexander's Avatar
Alexander Alexander is offline
Webmaster
 
Join Date: Oct 30 2002
Posts: 3,338
Alexander is on a distinguished road
Default RE: 400HP 390cid.

To get rid of the smoke you need new valve guides. To prevent valves from burning you need hardened or Stellite valves.

There are lots of high performance parts for the FE engine.

http://www.carrollshelbyent.com/engine_index.cfm

http://www.oregoncamshaft.com/428-FE.html

http://www.holley.com/types.asp?type=308

A good article on improving the horsepower of an FE engine: http://www.mustangandfords.com/techa...e_ford_engine/

Alexander
1959 Hardtop
1960 Golde Top
__________________
Alexander
1959 Hard Top
1960 Golde Top
Reply With Quote
  #3  
Old 10-21-2005, 02:09 PM
1960Bird 1960Bird is offline
Experienced
 
Join Date: Dec 4 2002
Posts: 159
1960Bird is on a distinguished road
Default RE: 400HP 390cid.

How much is your budget? 400 to 450 HP is not exactly cheap. Tell me what mods you have now.
mtl. cost estimate only:
For sure you will nead headers $400
Edelbrock RPM Intake $290
Cam $150 $250
Heads $300 to $1300 ported or new Edelbrock
2-1/2 inch exhaust $300 to $400
solid lifter Roller rockers $800 or more
Carb $300 to $450 around 750 CFM
gaskets misc???

I would also suggest changing to a higher ratio rear end I have a 3.70 at 55 mph runs about 2650 RPM





1960 HT 390, Edelbrock Performer RPM Intake, Shorty Headers, 2-1/2" Exhaust and 3.70 Rear Gears
__________________
390, Mild Cam, Headers, 3.70 rear, 2-1/2" Exhaust, Edelbrok Performer RPM Intake, Holley Street Avenger 670 Carburetor, One Wire Alt, Petronix Ignition. She's All Go and No Show.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:58 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.