This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 02-20-2005, 05:16 PM
milesperhour milesperhour is offline
Newbie
 
Join Date: Feb 20 2005
Posts: 1
milesperhour
Default transmission trouble

can i put a c6 tranny in my 63 big block bird? if so will linkage work the same
Reply With Quote
  #2  
Old 02-28-2005, 10:59 AM
Alexander's Avatar
Alexander Alexander is offline
Webmaster
 
Join Date: Oct 30 2002
Posts: 3,338
Alexander is on a distinguished road
Default RE: transmission trouble

I checked with a mechanic friend of mine. It is possible to do this swap. It has been done before. You need a later flexplate and flywheel than the original engine for this swap. The starter also needs to be from a '66 and later. The linkage will need to be modified to work wtih the C6 transmision. Mainly the rod length and bend needs to be modified.

Alexander
1959 Hardtop
1960 Golde Top
__________________
Alexander
1959 Hard Top
1960 Golde Top
Reply With Quote
  #3  
Old 11-01-2005, 10:57 AM
Hawkrod Hawkrod is offline
Experienced
 
Join Date: Oct 31 2005
Posts: 288
Hawkrod is on a distinguished road
Default RE: transmission trouble

You will also need to modify the trans mount or use the 66 crossmember and make it fit using a pair of flat steel plates to make the bolt pattern and position work. This is actually very easy as all you have to do is mount the trans and bolt teh crossmember to it and you will see where it needs to sit. Then take two small pieces of flat plat and make a pair of adapters with two holes in them. You also need teh kickdown linkage and a shift lever (the one on the trans itself) from a 66 Tbird to make everything line up properly and have the shift pattern match. Hawkrod


Hawkrod

39 Ford Deluxe Coupe
59 Tbird 430
60 Lincoln Premier
(2)62 Tbirds
(3)68 Cougar XR7-G's
69 Cougar 428CJ 4 speed
77 1/2 Ford F250 4X4 w/460 swap
86 SVO mustang
76 F250 Crew Cab
[font size=4][a href="http://www.supermotors.org/members/profile.php?user=hawkrod"] look at my cars past and present at superford! [/a][/font]
Reply With Quote
  #4  
Old 06-18-2006, 03:22 PM
EndotacO EndotacO is offline
Newbie
 
Join Date: Jun 5 2006
Posts: 17
EndotacO
Default RE: transmission trouble

just a thought, would an AoD swap allow more options?
Reply With Quote
  #5  
Old 06-19-2006, 09:46 PM
Hawkrod Hawkrod is offline
Experienced
 
Join Date: Oct 31 2005
Posts: 288
Hawkrod is on a distinguished road
Default RE: transmission trouble

Using an AOD would be a new from scratch proposition. The AOD does not bolt up to the stock engines so you would have to buy a custom adapter and then you would have to make a mount, linkage, driveshaft etc.... I am sure it could be done but it would not be as easy as a C6 swap is. Hawkrod
Reply With Quote
  #6  
Old 07-01-2006, 01:42 AM
byersmtrco's Avatar
byersmtrco byersmtrco is offline
Administrator
 
Join Date: Sep 28 2004
Posts: 1,611
byersmtrco is on a distinguished road
Default RE: transmission trouble

A company called Gear Vendor makes an over-drive unit that will bolt onto a C6. An added support brace is needed. Then with maybe 3:70 ratio, you'd have basically a 6 sp automatic. You'd have the best of all worlds. Lots of off the line acceleration and be about 2000 rpm at 70 MPH. I believe the unit is around 1400 bucks. Works off a switch. They've been around for a long time. They've been making making OD units for Motor Homes for 20 + years.

This unit is aprox # 15 on my wish list, right after a 428 CJ cleverly disguised as a 352. ha ha . . .

John


__________________
John Byers
1960 Convertible (Orig owner)
Pic of car with my son Justin (15 Y/O 6'1")
Poss 3rd Gen T/B owner
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:59 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.