This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 11-03-2016, 11:56 PM
moparmusclecars moparmusclecars is offline
Newbie
 
Join Date: Nov 2 2016
Posts: 1
moparmusclecars is on a distinguished road
Default 1957 T Bird Hood gaps

Can anyone tell me what the specs are for the hood gaps? Mainly front to back (near cowl). I believe mine are tight, and thinking this Bird was hit in the front nose. Thanks, Guys!
Reply With Quote
  #2  
Old 11-04-2016, 04:53 AM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,068
simplyconnected is on a distinguished road
Default

Fit and finish on all cars is best done by eye, not a specific measurement. The fenders and doors are adjustable because all sheet metal stampings are different sized. The metal thickness varies too.

Gaps and seams need to be the same on opposite sides. Sometimes exact measurements look odd. The final fit should look pleasing. - Dave
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
  #3  
Old 11-04-2016, 11:33 PM
Wade Wade is offline
Newbie
 
Join Date: Sep 4 2013
Posts: 11
Wade is on a distinguished road
Default

Just went through a repaint with major body work. Trying to get the gaps to look decent gets to be a costly endeavor unless you are fortunate enough to be able to do your own body work. The welded on body panels make it next to impossible to get perfection. That being said the thickness of a paint stirring stick was used as a gauge on my car. It makes a nice gap if you are able to attain it.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:57 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.