This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 05-13-2016, 04:34 PM
Hazegray53 Hazegray53 is offline
Apprentice
 
Join Date: Jan 9 2015
Posts: 54
Hazegray53 is on a distinguished road
Default Camshaft bolt and spring

What is the purpose of the spring over the cam bolt? Is the spring suppose to be positioned over the keeper or does that keeper actually hold the spring?
Reply With Quote
  #2  
Old 05-13-2016, 05:39 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,072
simplyconnected is on a distinguished road
Default

The purpose of the spring is to pre-load the cam so the front flange is against the block. Notice there is no thrust plate.

Here are assembly instructions:
Install the fuel pump eccentric and the camshaft sprocket cap screw and thrust button spring retainer. Tighten the sprocket cap screw to specifications. Install the camshaft thrust button spring and thrust plate button. Install the crankshaft front oil slinger.

So, the bolt holds the eccentric and spring retainer. Then, the spring and button are installed.

I'm not a big fan of this system. I like a simple thrust plate. Later FEs use the thrust plate and you can too IF you drill and tap two holes, buy a new cam (1963 and later) and thrust plate. The cam sprocket comes with a new roller chain set (1963 and later). - Dave
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
  #3  
Old 05-13-2016, 06:20 PM
Hazegray53 Hazegray53 is offline
Apprentice
 
Join Date: Jan 9 2015
Posts: 54
Hazegray53 is on a distinguished road
Default

Ok I get it now. The motor has already been rebuilt so I probably won't be putting in a different cam anytime soon or drilling any holes. Of course one of the spring retainer tabs broke on me. Any idea where I can get a new one?
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:10 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.