This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 02-07-2008, 06:14 PM
texastomeh texastomeh is offline
Apprentice
 
Join Date: Aug 28 2007
Posts: 43
texastomeh is on a distinguished road
Question "Rube Goldberg" PCV Setup???

Guys,

My '63 TBird (390 4V) has (in my Chevy opinion) the most "Rube Goldberg" PCV setup that I have ever seen. And, according to the factory manual - it is completely stock and correct!

I do not know if the PCV of all 390s of that era are this way, but the TBird it is set up as follows: A short (4 in.) piece of 1/2 in. dia. hose connects the long leg of an 1/2 in. dia. 8 in. X 4 in. "J" pipe to the crakecase port at the rear of the engine. The other leg of the "J" pipe is connected to the PCV Valve by another (10 in.) piece of 1/2 in. hose. The other end of the PCV Valve is threaded into a inverted "Y" fitting which is bolted to the intake manifold. One of the "legs(?)" of the inverted "Y" is sealed/solid. The other leg is connected to the base of the carb bt yet another(~ 6 in.) piece of 1/2 in. hose. All-in-all it consists of three sections of 1/2 in. hose, six clamps, the "J" pipe, the inverted "Y" fitting, and the PCV Valve!

Don't get me wrong! I do NOT want to eliminate the PCV Valve! It just seems to me that it would just be more efficient and cleaner looking to run a 6-8 in. length of 1/2 in. dia. hose from the crankcase port to the PCV Valve and another 4-6 in. piece from the Valve to the base of the carb.

Am I missing something re the purpose and reason for all these other pieces of plumbing?

thanx,

texastomeh
Reply With Quote
  #2  
Old 02-11-2008, 01:51 PM
Hawkrod Hawkrod is offline
Experienced
 
Join Date: Oct 31 2005
Posts: 288
Hawkrod is on a distinguished road
Default

The system is designed the way it is prevent oil use. The metal tube allows some cooling and the shape causes oil to fall out of suspension. This reduces the amount of oil that might be drawn through the PCV. I am not sure if it really works but that was the engineers intent. Hawkrod
Reply With Quote
  #3  
Old 02-11-2008, 05:32 PM
texastomeh texastomeh is offline
Apprentice
 
Join Date: Aug 28 2007
Posts: 43
texastomeh is on a distinguished road
Default

Thankx, Hawk.

I sorta' suspected as much - hoping the was some; "Method to their madness."
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:26 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.