This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 03-06-2017, 09:47 PM
hpozz33 hpozz33 is offline
Newbie
 
Join Date: Feb 17 2017
Posts: 3
hpozz33 is on a distinguished road
Default disc brakes

is there a disc brake conversion that will fit 14" wires i heard that one method leaves about 1/2 an inch. Is that enough.I like the idea of disc brakes but it to costly to change wire wheels
pozz
Reply With Quote
  #2  
Old 03-07-2017, 07:05 PM
DKheld's Avatar
DKheld DKheld is offline
Super-Experienced
 
Join Date: Aug 27 2008
Posts: 1,443
DKheld is on a distinguished road
Default

Two basic options and there are not really any "kits".

Granada spindles and calipers - have that on my car - alignment is a nightmare plus other specialized items like the front flex lines.



The easy route - Scarebird brackets on the OEM spindles. Believe you can get a complete list of items needed for the Scarebird brackets by joining the forum (it's cheap) Send a message to Simplyconnected - one of our admins - he has a ton of info.

More than just adding the disc's though - booster, lines, new master cyl etc but with either option you will need to change wheels. The center hole on the OEM Ford drum wheel is too small to clear the rotor snout. I used 70's Ford LTD 14 inch wheels but there are other options.

Search the site on Disc's or Disc brakes for a lot of info.
http://www.squarebirds.org/vbulletin/search.php

Eric
Reply With Quote
  #3  
Old 03-07-2017, 07:21 PM
jopizz's Avatar
jopizz jopizz is offline
Excellent Auto Mechanic for over 40 years.
 
Join Date: Nov 23 2009
Posts: 4,882
jopizz is on a distinguished road
Default

I think he's asking if he can reuse his 14" wire wheels with the disc brake conversions that are available. I know this question has been asked before. What make are your wheels. If they are the Coker Kelsey Hayes Replicas they have two different backspacing; 3.25 and 3.50. I would measure your backspacing and see what you have. I'm pretty sure the 3.25 won't work.

John
__________________
John Pizzi - Squarebirds Administrator
1959 Convertible

Thunderbird Registry #36223
jopizz@verizon.net 856-779-9695

http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #4  
Old 03-07-2017, 07:27 PM
DKheld's Avatar
DKheld DKheld is offline
Super-Experienced
 
Join Date: Aug 27 2008
Posts: 1,443
DKheld is on a distinguished road
Default

Thanks John - I see what you mean.



Eric
Reply With Quote
  #5  
Old 03-07-2017, 07:31 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,163
simplyconnected is on a distinguished road
Default

I have an important question... Did your Squarebird come with a power brake booster mounted in the engine compartment?

Dkheld knows his stuff. He is using a Granada setup (and so am I, on our '55 Customline). For fifteen bucks, I had a lathe hand turn down my rotor snouts to match my OEM hubs. Both the Granada and the S-10 systems work equally as well.

I'm also using the Scarebird (S-10) setup on our '59. I don't have a preference because I was able to get the Granada setup cheap, from a bone yard in Florida. They both use a 2.5" piston on 11" rotors, so they stop about the same.

What wire wheels are you running? - Dave
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
  #6  
Old 03-23-2017, 06:42 PM
byersmtrco's Avatar
byersmtrco byersmtrco is offline
Administrator
 
Join Date: Sep 28 2004
Posts: 1,611
byersmtrco is on a distinguished road
Default

I'm running 14's
KH (REPROD) wires will work - Orig will not.
You will have to run 1/8" spacers as I do so the
wheels will clear the calipers.
__________________
John Byers
1960 Convertible (Orig owner)
Pic of car with my son Justin (15 Y/O 6'1")
Poss 3rd Gen T/B owner
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:24 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.