This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 09-29-2016, 09:50 PM
fordrodsteven's Avatar
fordrodsteven fordrodsteven is offline
Newbie
 
Join Date: Sep 24 2016
Posts: 16
fordrodsteven is on a distinguished road
Default 55 Tee-Bird resto-mod

I started this same thread on another web site. When I signed up for this site I was invited to share my "story" here. It is a looong story and I calculate it will be a couple years from now (now = end of 2016) before I get this car done. Hope to be driving by spring of 2019. So, here goes!
I bought the car in the fall of 1975 (41 years ago) It was a running, driving car when I bought it. It had been converted to 12V and had a 289 - three speed manual in it. The exterior was and still is) primer gray. The interior consisted of a seat and a dashboard. No door panels, kick panels or carpeting. the soft top was in tatters and the fiberglass hardtop was repaired where it had cracked. The floors were rusted and patched with small pieces of metal tack welded in. When I drove through a rain puddle my legs were getting wet. The glass in the doors was cracked / broken. Probably because the 6V motors raised the windows up really fast and jammed them into the hard top.

I'm a pretty good mechanic and can fix most anything. I took a night course in auto body repair with plans to repair and paint the car. I planned on doing a frame on restoration. I pulled the engine and traded for a 292 automatic. I bought a set of windows for the doors. I bought the few pieces of chrome trim that were missing from the car. Then job, home ownership and family took over all my time.
I met a guy who was the president of the local area T-bird club and very much into the "little" birds. After much discussion I was convinced to stay with the resto-mod that had been started before I bought the car. A lot happened in the next 35 or so years. I got a job transfer to CA and took the car from MA to CA with no engine/trans in it. I then moved to SC and brought the car with me (still no engine/trans) In SC I finally figured out why I had to keep adjusting the doors to make them open / close properly. The bottoms of the door posts were rusted and the braces under the floor were gone. I bought a welder and repaired the door posts. I fabricated floor braces and put them in. I fabricated panels for the floors and both sides (inside) the trunk. I started working on the body (sanding and priming). I bought a non-running '81 Thunderbird. I stripped the '81 completely. I began putting in the wiring harnesses from the 81 Bird. I modified and installed the tilt steering column from the '81 into my '55. I put the 302 automatic into my car. I fabricated a bracket for the AC compressor so it would fit under my hood. I modified the power steering pump bracket so it would fit between the frame rails. I also fabricated a new cross-member piece for the rear of the transmission. It was at this point I moved from SC back to MA. Unfortunately I had no place to keep the car and I left it at my sister's house, under a tarp for a year. The elements were not nice to my car! The car was then inside my dark damp falling down garage for ten years. So here we are now. I retired in the spring of 2014. I built a new garage in 2015. This year I installed a two post lift and I bought a rotisserie. I began meeting up with the guys who are club members of CTONE (Classic Thunderbirds of New England). The car was originally white with a black and white interior. I plan to bring it back to that color scheme but probably not "snowshoe" white. I have many ideas of possible changes but mainly I want to make it a safe driver and finally enjoy it after these 41 or so years.
Hope I haven't bored you guys! There will be more to come. Now I just need to learn how to add pics to this thread.
__________________
Steve
1955 Thunderbird project in process
Tee-bird registry # 63034
CTCI member #37081

Last edited by YellowRose : 09-30-2016 at 11:41 PM.
Reply With Quote
  #2  
Old 09-30-2016, 08:28 AM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,126
simplyconnected is on a distinguished road
Default

I think you're smart for using a SBF engine instead of a Y-Block because there is a lot less maintenance, the newer engines were made for today's liquids and parts are everywhere.
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
  #3  
Old 09-30-2016, 08:51 AM
YellowRose's Avatar
YellowRose YellowRose is offline
Super-Experienced and a HELLOFA nice guy
 
Join Date: Jan 21 2008
Posts: 11,893
YellowRose is on a distinguished road
Default 55 Tee-Bird resto-mod

Steve, thank you for posting your account on your '55 Tbird! It was an interesting read for sure. Since you are a Paid Member, you can post pix by going down below the box you were typing in and you will find the Additional Options section that you, as a Paid Member, should see. There you will find the Manage Attachments section. Click on it and it will allow you to upload your pix directly onto our server. You MUST set them to no bigger size than 800x600pixels. There is info in our PC Help Desk Form on how to do that, or send them to me, or jopizz and we can downsize them for you and send them back to you to upload. Or we can upload them for you. You should be able to go into your big post and add pix there. Or you can start a new post in that thread and put the pix there. If you have problems, call me.
__________________

Ray Clark - Squarebirds Administrator
'59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
"It's Hip To Be Square"
Thunderbird Registry #33025 VTCI #11178

rayclark07"at"att.net (Home) 210-674-5781 (Cell) 210-875-1411
http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

Last edited by YellowRose : 09-30-2016 at 11:41 PM.
Reply With Quote
  #4  
Old 09-30-2016, 10:06 AM
Joe Johnston Joe Johnston is offline
Super-Experienced
 
Join Date: Dec 23 2008
Posts: 665
Joe Johnston is on a distinguished road
Default

You have done a lot and now you have a place to work and a plan of attack. I also know how "life" has a priority and stonewalls a project car. I lost interest in my 57 and it sat basically untouched for 17 years. Fortunately I had dry climate controlled storage and eventually I picked up right where I left off. Enjoy your project!
Reply With Quote
  #5  
Old 09-30-2016, 11:26 PM
fordrodsteven's Avatar
fordrodsteven fordrodsteven is offline
Newbie
 
Join Date: Sep 24 2016
Posts: 16
fordrodsteven is on a distinguished road
Default

I saw a friends '56 where he put in a '57 dash. He said it's a direct bolt-in. I've been toying with the idea of installing the dash from the '81 into mine.
__________________
Steve
1955 Thunderbird project in process
Tee-bird registry # 63034
CTCI member #37081
Reply With Quote
  #6  
Old 10-01-2016, 07:52 PM
scumdog's Avatar
scumdog scumdog is online now
Super-Experienced
 
Join Date: May 12 2006
Posts: 1,349
scumdog is on a distinguished road
Default

Quote:
Originally Posted by fordrodsteven View Post
I saw a friends '56 where he put in a '57 dash. He said it's a direct bolt-in. I've been toying with the idea of installing the dash from the '81 into mine.
I guess THAT swap won't be a 'direct bolt-in'!!
__________________
A Thunderbirder from the Land of the Long White Cloud.
Reply With Quote
  #7  
Old 10-03-2016, 09:37 PM
fordrodsteven's Avatar
fordrodsteven fordrodsteven is offline
Newbie
 
Join Date: Sep 24 2016
Posts: 16
fordrodsteven is on a distinguished road
Default

Here's a couple of pics of what the interior looked like when I bought the car.
Attached Images
File Type: jpg rightfloor0002.jpg (106.5 KB, 71 views)
File Type: jpg leftint0002.jpg (105.3 KB, 72 views)
__________________
Steve
1955 Thunderbird project in process
Tee-bird registry # 63034
CTCI member #37081
Reply With Quote
  #8  
Old 10-04-2016, 09:52 AM
Joe Johnston Joe Johnston is offline
Super-Experienced
 
Join Date: Dec 23 2008
Posts: 665
Joe Johnston is on a distinguished road
Default

A member on one of the forums showed pictures of the AC vent unit he made. I think he salvaged some narrow vertical vents but used them horizontally in a long thin box he built that went across the bottom of the dash. Painted to match the interior and looked very nice without hanging down in the way. Digital dash panels are available for 57's, not sure about 55 & 56's but should be a do-able project.
Reply With Quote
  #9  
Old 10-04-2016, 12:02 PM
fordrodsteven's Avatar
fordrodsteven fordrodsteven is offline
Newbie
 
Join Date: Sep 24 2016
Posts: 16
fordrodsteven is on a distinguished road
Default

Thank you Joe. I think I saw something on "Second Chance Garage" web site. They did a whole series on a '55 resto-mod. Maybe I'll revisit the article and look at it again.
__________________
Steve
1955 Thunderbird project in process
Tee-bird registry # 63034
CTCI member #37081
Reply With Quote
  #10  
Old 11-27-2016, 06:10 PM
fordrodsteven's Avatar
fordrodsteven fordrodsteven is offline
Newbie
 
Join Date: Sep 24 2016
Posts: 16
fordrodsteven is on a distinguished road
Default

I have been going out to the garage for short times when the temperature gets to be over 50 degrees. That won't happening for much longer. Anyway, I have been scraping the paint and bondo off the car one section at a time. So far I have done both side rear quarters and the doors. I am getting off four or five layers of paint & bondo. I have been getting down to the original snowshoe white color. I have a question.... I have been finding a layer under the white finish that appears to be a "skim coat"? Is that how it was done at the factory? In the spots where I went to bare metal I am not finding a primer (unless it was white). It seems to have this thicker skim coat applied directly to the metal and then a thin layer of what looked to be the original paint. Is that how they were done? I tried to resize my pics but they are still too large (277KB) to put on the web site (145KB limit)
__________________
Steve
1955 Thunderbird project in process
Tee-bird registry # 63034
CTCI member #37081

Last edited by fordrodsteven : 11-27-2016 at 06:20 PM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:59 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.