This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
Old 01-31-2016, 11:19 PM
62-TBird 62-TBird is offline
Join Date: Jan 31 2016
Posts: 6
62-TBird is on a distinguished road
Default 62 t bird motor mount help!

Hi guys, I am 15 years old and recently acquired a 62 thunderbird needing interior work only and some small engine work(changing gaskets), as this car is my first car, and is a classic I decided to do a burnout only once! I ended up shearing a motor mount bracket and destroyed my rear shocks, and front ones! After replacing all the shocks, brakes, master cylinder and wheel cylinders relatively easily, also valve cover gasket and head gasket, oil pan gasket, I also replaced the hardest freeze plug ever, after all of this and wondering why my exhaust manifolds were touched the wheel wells, and that the alternator bracket is rubbing against the frame and causing massive sparks, I decided to replace ALL the motor mounts, found out where I sheared the motor mount, and am looking at ordering a new one, since my parents don't really want to help or have anything to do with it, money is kind of tight, so, I personally have a welder Etc and was wondering if I could cut the motor mount bracket in 2, replace the bolt with a grade 8 or 10 bolt, and weld it back together, I have a mig welder and I think a tig welder. If someone could tell me how to post pictures that would be great!
Reply With Quote
Old 01-31-2016, 11:39 PM
YellowRose's Avatar
YellowRose YellowRose is offline
Super-Experienced and a HELLOFA nice guy
Join Date: Jan 21 2008
Posts: 12,624
YellowRose is on a distinguished road
Default 62 t bird motor mount help!

Zak, first let me confirm what you just said! You are 15 years old?! And YOU have done all that work yourself? I am interested in learning where you got your mechanical ability at 15 years of age! On the other hand, our fantastic webmaster, Dave Dare ~ simplyconnected (someone you need to get to know and also John ~ jopizz) tells me that at 15 he was pulling engines on cars and doing his own work like you! Dave is retired from the Ford Plants of Detroit, and he and jopizz are master mechanics and then some!

As for posting pix on this Forum, if you have not looked at the Welcome that John Pizzi ~ jopizz posted to you in the New Members Welcoming Forum, you should. There is the information on how to post pix on this Forum. The cheapest and easiest way is to put them on a free photo hosting website like Photobucket. But if you do, set your pix to no bigger than 800x600pixels. That is the maximum size allowed for posting on our Forum. You can also send those pix to me, or to jopizz to post for you.

Ray Clark - Squarebirds Administrator
'59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
"It's Hip To Be Square"
Thunderbird Registry #33025 VTCI #11178

Contact me via Private Message for my email address, or (Cell) 210-875-1411 (Home) 210-674-5781

Last edited by YellowRose : 02-01-2016 at 12:00 AM. Reason: Additional information
Reply With Quote
Old 01-31-2016, 11:58 PM
jopizz's Avatar
jopizz jopizz is offline
Excellent Auto Mechanic for over 40 years.
Join Date: Nov 23 2009
Posts: 5,496
jopizz is on a distinguished road

I'm certainly not going to try and talk you out of repairing the mounting bracket if you don't want to put out the $38 or so for a new one. Part of the fun in restoring old cars is improvising to cut costs. However, considering the amount of weight that is on that bracket I wouldn't be comfortable with one that's been cut and repaired even by an experienced welder. There are certain things that you can save money on but I wouldn't consider that one of them.

John Pizzi - Squarebirds Administrator
1959 Convertible

Thunderbird Registry #36223 856-779-9695
Reply With Quote
Old 02-01-2016, 12:52 AM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
Join Date: May 26 2009
Posts: 7,524
simplyconnected is on a distinguished road

Welcome to, Zak. You bring me back to the days when I was fifteen and wrenching on cars.

Your '62 probably has a 390 that delivers a lot of torque. Unless the body is badly rusted and you didn't run into something, there should be no problem doing burnouts.

It's a wonderful thing to replace all the brake components and shocks but they have little to do with a burnout. Your motor mounts have two pieces that simply bolt together. The rubber part bolts to the engine and a sheet metal part below it bolts to the #2 crossmember (shown below). Which part broke? Do you have an engine hoist?
Send a picture of your broken mount to me ( - Dave
Attached Images
File Type: jpg 1962TBirdMotorMounts-171.jpg (110.8 KB, 36 views)
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
Old 02-01-2016, 09:08 AM
Dan Leavens's Avatar
Dan Leavens Dan Leavens is offline
Moderator / Administrator
Join Date: Oct 4 2006
Posts: 4,944
Dan Leavens is on a distinguished road

wow Zak is 15 years old, already into a 62 TBird classic and ready to pull some wrenches with help from our members.

Zak great to have you onboard and our members are certainly here to assist in your repairs.
This is why I always say this is the best TBird site on the planet.
Dano Calgary,Alberta Canada
Thunderbird Registry
58HT #33317
Reply With Quote
Old 02-01-2016, 09:37 AM
Joe Johnston Joe Johnston is offline
Join Date: Dec 23 2008
Posts: 697
Joe Johnston is on a distinguished road

I too would like to congratulate you on your accomplishments. As to the motor mount issue, high performance parts are available that are solid, or have bolts through them or the steel is stamped in such a way to keep the motor from lifting if the rubber is sheared. All of these will cost more than stock mounts but are stronger, but may need modification to fit a Thunderbird as you will probably find them for Mustangs or big Fords. Once you get the mounts replaced, many use a short length of heavy chain bolted to the front of the block driver's side and then bolted to a framing or unibody structure area that is strong. When you break another mount doing burnouts, the chain will keep the engine from lifting and prevent additional damage. (Yes, I have been there and done that - broke 2 mounts in one weekend in my Fairlane before adding the chain.)
Reply With Quote
Old 02-01-2016, 01:53 PM
62-TBird 62-TBird is offline
Join Date: Jan 31 2016
Posts: 6
62-TBird is on a distinguished road
Default Yes I am 15

I got all of my engine rebuilding from my neighbor before I moved, for my 12th birthday he gave me a Chevy 327 ( I know not a ford) and he showed me how to rebuild it, we put performance oil pan, crank, pistons, connecting rod, stock heads but he showed me how to port them myself! He was a very good help, I changed all the gaskets etc, when i was 14 years old I picked myself up a golf cart, what was non running and I rebuild the engine; did all the wiring and also some body work that has been destroyed running into trees, I don't have an engine lift, yet I could easily get one, I need one for my 327 to put it back on the engine stand as it leans forward quite a bit... The shocks all had holes in them and the car was sooo close to the ground I couldn't go up a little curb to get into my driveway. The body is not badly rusted, actually the only rust is on the stupid suspension bolts and under one body panel, I have removed it and it doesn't go all the way through so once I get enough money to paint the car i will! I have new rubber motor mounts with the right angle in them, and it was the metal triangle looking thing, with the bolt that connects it to the it was the part that connects it to the crossmember, looks kid of like a triangle with a bolt going through it, let's just say that it snapped off! It has a bored 30 over engine with new Pistons in it (10k miles)

EDIT: the shocks just basically gave out, they were basically shot anyway but the car bucked backwards soo much on a heavy acceleration, that it just kind of made a boom noise because it bottomed out and the bump stop wasn't existent then I have replaced those so I should be good!
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 06:43 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by