more progress........i now have a working heater! took the part of the console that houses the heater controls out and got a good look at the back of all of it. it's pretty simple back there, even for me! both red and orange (hi/low) wires that run from the heater controls to the heater motor in the engine bay were there and hooked up. then i popped the hood and pulled apart the orange and red wires at their connections to the heater motor and jumped power from the battery directly to them. motor worked fine.
only thing left to do was hook up the brown wire with the inline fuse from the acc post (what does acc stand for anyway?) on the ignition switch to the back of the heater controls and see what happens.........the motor came right on. victory! that brown wire was the one that was laying loose when i started checking things out so i was afraid it was bad but i guess not. now about that non-working radio.....(i will start a new thread on that one!)
only thing left to do was hook up the brown wire with the inline fuse from the acc post (what does acc stand for anyway?) on the ignition switch to the back of the heater controls and see what happens.........the motor came right on. victory! that brown wire was the one that was laying loose when i started checking things out so i was afraid it was bad but i guess not. now about that non-working radio.....(i will start a new thread on that one!)
Comment