Does someone have the specifications for the bushing sizes required for the rear arms and isolators? It does sound like a good solution would be to look at a bushings catalog for a match or at least they would be very close.
Announcement
Collapse
No announcement yet.
Upper Suspension ( control ) Arm Bushings, Rear
Collapse
X
-
-
Looking at the shop manual, and also the company who vulcanize them for me booth mention that the bushings need to be pushed in by a press, so I never got any dimensions as they wanted the control arms and lathed it down until they could press them in. First try didnīt work out as it was to big, so they took down the diameter and tryed it again until they got them in.So "oversize" is the only hint I have....Comment
-
I found a couple of bushing companies that are interested in helping us if we can provide the sizes for the '58 rear bushings.
This is what I have......
suspension, polyurethane, poly, bushings, restoration, prothane, mopar, shelby, polly, poly bushings, polybushings
You'll need to measure yours and take a look. I know its a one year deal.
If you don't see it there, try......
call him, he might be able to help if you know what you need.
Johnny Spiva
PO Box 4283
Coos Bay Oregon 97420Comment
Comment