Announcement
Collapse
No announcement yet.
Road Draft v. PCV
Collapse
X
-
-
Geoff, I cover this in one of my sites: Click Here
I made the damper puller I used. It cost me about a buck to make.
The sleeve slides off with NO special tools. You will need to remove the key in the crankshaft post before sliding the sleeve off. It's all in the pictures. - DaveMember, Sons of the American Revolution
CLICK HERE to see my custom hydraulic roller 390 FE build.
"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
From: Royal Oak, MichiganComment
-
Both Autozone and Advance Auto have a loan a tool program so it won't cost you anything if you don't have the correct puller.
JohnJohn Pizzi - Squarebirds Administrator
Thunderbird Registry #36223
jopizz@squarebirds.org 856-779-9695
https://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htmComment
-
Maybe things have changed since we replaced our '60 timing chain.
Many timing sets were advertised as fitting 58-76 Ford/Mercury FE
engines without taking into consideration of the cam button installation on the early years of the FE. Possibly up to 1963.
The removal and installation was easy to do and allowed the opportunity to wash out the oil pan.AustinComment
Comment