Thanks for the pep talk Dave! Lots of info there to digest, and I'm still gonna be stressing until I get that sucker out. I have a propane torch that works OK for soldering but I think I need a different tip to concentrate the flame to get that stub red hot. I have no idea how I would rig up a drill guide the way you describe...sounds like a good idea though. Would that use some sort of off-the-shelf contraption with some "customization"? Do you have any pictures?
The larger drill bit I have says BRUTE 5/32 HS USA which seems pretty garden-variety, assuming HS and HSS are equivalent? I did some research and need to do more, but is this what I need?
On a positive note the radiator is back from the shop and looking like new, and here's what a newly re-chromed bumper looks like after the bumper guard divots are filled in.
The larger drill bit I have says BRUTE 5/32 HS USA which seems pretty garden-variety, assuming HS and HSS are equivalent? I did some research and need to do more, but is this what I need?
On a positive note the radiator is back from the shop and looking like new, and here's what a newly re-chromed bumper looks like after the bumper guard divots are filled in.
Comment