I am needing a little help. I blew the seals on the power steering valve and instead of rebuilding it I replaced it with a rebuilt unit. I also replaced the return hose (had one made at a hose shop) and changed one pipe to the cylinder with a hose also made at a hose shop. Since then the power part of the power steering does not work below 2000 rpm. The pump is a rebuilt unit that was working before the blow out and the cylinder is a new unit from about a year ago, also working before the blow out. If anyone has any suggestions please let me know.
I am going to exchange the valve for a different one to see if that helps unless someone has a better idea.
Thanks
Leonard
I am going to exchange the valve for a different one to see if that helps unless someone has a better idea.
Thanks
Leonard
Comment