Looking for everyone thoughts.
I bought and installed the tom classics disc brake retrofit kit from eBay. After the installation was completed I've tried to bleed this system and have not been able to get anything but a spongy pedal. Now I've put at least 180oz of fluid through the system bleeding and have started over from bench bleeding the MC more then once. Have bread it with the two men manually bleed and a one man vacuum bleed with no luck same results. I've sent an email to tom classics asking for a new MC since I can't find any other problems.
Note I've added a residual pressure valve for the rear brakes and use a prop valve bleeder tool. Still nothing but a sponge.
Help
I bought and installed the tom classics disc brake retrofit kit from eBay. After the installation was completed I've tried to bleed this system and have not been able to get anything but a spongy pedal. Now I've put at least 180oz of fluid through the system bleeding and have started over from bench bleeding the MC more then once. Have bread it with the two men manually bleed and a one man vacuum bleed with no luck same results. I've sent an email to tom classics asking for a new MC since I can't find any other problems.
Note I've added a residual pressure valve for the rear brakes and use a prop valve bleeder tool. Still nothing but a sponge.
Help
Comment