View Single Post
  #6  
Old 06-19-2010, 07:31 AM
ncbird ncbird is offline
Experienced
 
Join Date: Jan 5 2008
Posts: 390
ncbird is on a distinguished road
Default old school

If the drum doesnt want to seperate from the hub it is because it has formed a bond with the hub mating surface. Put the hub/drum back on the spindle and tighten it down. I dont recommend hitting a drum on the edge because of the risk of chipping the drum. Hit it between the studs..by that I mean hit the face of the drum directly on top of where it mates to the hub. Work your way around the drum hitting in between the studs and I mean hit it. I usually use a large ball peen and try to hit flat. This has been my experience. Grant
__________________
Grant
NCbird on the Coast of NC
"Dads Bird" for my father
Reply With Quote