I need to work on the ignition wiring, a previous owner has hacked it badly, looks like I will need to remove the ignition switch to fix it properly.
So before I try anything I thought I would ask if there are any tricks to it, I know GM cars need to have the key in the switch and tumbler removed before the bezel can be unscrewed. Do the Fords have a similar deal?
Thanks in advance for any advice.
Mark
So before I try anything I thought I would ask if there are any tricks to it, I know GM cars need to have the key in the switch and tumbler removed before the bezel can be unscrewed. Do the Fords have a similar deal?
Thanks in advance for any advice.
Mark
Comment