Bushing(s)- 351341-S Spring Washer
Check pin wear on 7302 and pin hole on 7354. Check anything that moves (have someone jiggle shift lever).
There is a BIRD dedicated bell crank asm (7326 goes to) but it is not shown on ILL. It may be shown in the Shop Manual.
Basically, all linkage(s) must be correct (not worn) and adjusted correctly. Adjusting the neutral safety switch would follow this.
Check pin wear on 7302 and pin hole on 7354. Check anything that moves (have someone jiggle shift lever).
There is a BIRD dedicated bell crank asm (7326 goes to) but it is not shown on ILL. It may be shown in the Shop Manual.
Basically, all linkage(s) must be correct (not worn) and adjusted correctly. Adjusting the neutral safety switch would follow this.
Comment