View Single Post
  #7  
Old 03-12-2012, 07:07 PM
redstangbob redstangbob is offline
Experienced
 
Join Date: Feb 18 2011
Posts: 217
redstangbob is on a distinguished road
Default

The plate attached to the intake manifold is held on with drive screws http://www.fastenal.com/web/products...l.ex?sku=32213 They can be backed out with a chisel or a slot cut for a screwdriver. There should have been a valley pan tucked under the tabs of the head gaskets, it helps direct oil away from the intake. Good luck, Bob C
Reply With Quote