squarebird parts

[Guest]

many interior and exterior parts incuding suspention parts glass bumpers etc i have 2 smile bars or bumper/grill fillers for the front bumper replated and beautiful contact me with your requests thanks Vince

[Alexander]

RE: squarebird parts

Vince,

I got the grille smile by Airborne Express today. It looks great. Thanks.

Alexander
1959 Hardtop
1960 Golde Top

[Guest]

RE: squarebird parts

What the smile bar I am new My bumper (59) has a chrome strip lining the main bumper mouth with transitions to Horizontal bars. Yes it only goes around the lower part making it a smile. Are all the years the same -- the parts books reference the same numbers but show different one each year. How much and do you know any one in the Hampton Roads area of Virginia (lonely here)

[Alexander]

RE: squarebird parts

I looked at a friends's 1958 "smile" and compared it to my 1960. It looks pretty much the same. I will compare my 1959 next weekend.

Alexander
1959 Hardtop
1960 Golde Top

[Guest]

RE: squarebird parts

I am looking for the hinges for the Convertible trunk lid not the springs also the surge tank for the engine/radiator

[Guest]

RE: squarebird parts

I need some nice, and good switches for the power windows on my 60 Bird. Would you have these?
OkieHog

[Rockin Kev]

RE: squarebird parts

Okiehog, Visit www.tbird.org you will find links on this site to most Venders, I purchased my window switches from Pat Wilsons, not new put in show condition for $80.00. Please note the 60 switches are White not Black like the 58s.
Most Venders are now supplying the crome surround for the switch housing but new repro switches should be on the market next year.
Kevin

[Toms 2_TBirds]

RE: squarebird parts

I recently refurbished the steering wheel on my 1960 tbird. While re-assembling the steering whel to the drive shaft I accidently broke the circular plastic "ring" that indicates what gear you are in. The horn "spring" mounts on this". I am willing to pay $30 if someone will sell me a good condition one of these.
Please contact me at tom.sheets@comcast.net

[Guest]

RE: squarebird parts

>I recently refurbished the steering wheel on my 1960 tbird.
>While re-assembling the steering whel to the drive shaft I
>accidently broke the circular plastic "ring" that indicates
>what gear you are in. The horn "spring" mounts on this". I
>am willing to pay $30 if someone will sell me a good
>condition one of these.
>Please contact me at tom.sheets@comcast.net

I'm in the same boat. Let me know if you find a supplier. Or one you don't want.

Brian Costello

[Guest]

RE: squarebird parts

hi vince, just bought a 60 bird. looking for wind sheild and pass. window. do you have, how much, where are you? thanks for now, lee.

[pirate]

RE: squarebird parts

Ed Orton the Pirate Need front and rear seats. do you have them and how much wampum.

[Guest]

RE: squarebird parts

>I looked at a friends's 1958 "smile" and compared it to my
>1960. It looks pretty much the same. I will compare my 1959
>next weekend.
>
>Alexander
>1959 Hardtop
>1960 Golde Top

Response to an old post .. I know ...

With the 60 bumper I got for my 58, I noticed that the smile bars are indeed different.

The 58's edge is squared off at the corners, while the 60's is tapered. Not sure about the 59's -- don't have one to compare.