neutral safety switch

[Guest]

Ok, I'm now at the stage of installing my floor shifter and I need to reroute the neautral safety switch. I'm using a b&m quicksilver shifter.
Is it just as simple as disconnecting wires from old switch under column and connecting to new switch on floor shifter. Which wire does what under there. My drawing is a bit unreadable in that section.
Thanks Chris.

[jopizz]

On the old neutral switch the red/blue wires go to the starter solenoid and the black/red wires go to the backup lights.

John

[Guest]

Thanks mate, that helps a l lot. all sorted now.
Cheers Chris.