Hi all .. i d like to know from somebody who already had this issue... I am soon going to rebuild my 352 on my 59 bird.. can i put the engine block in place with all the inner parts installed.. and then continue to add ancillaries to it as it is fitted to both mountings and gearbox ?? Great thanks in anticipation
Announcement
Collapse
No announcement yet.
Reputting the engine back in space
Collapse
X
-
Tags: None
-
I prefer to put the bare block in and then add everything else when it's in the car.
JohnJohn Pizzi - Squarebirds Administrator
Thunderbird Registry #36223
jopizz@squarebirds.org 856-779-9695
https://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htmComment
-
The factory installed the engine AND trans as one unit, complete with all manifolds, starter motor, water pump and pulleys. One man worked from the top and another was in a pit, guiding the tail shaft and motor mounts. They dropped one engine per minute, approaching nearly 500 each shift.
It is MUCH easier and faster to assemble the engine and trans outside the body, then worry about connecting the exhaust pipes and wires afterward. - DaveMember, Sons of the American Revolution
CLICK HERE to see my custom hydraulic roller 390 FE build.
"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
From: Royal Oak, MichiganComment
-
Hmm cant compare myself to the production line ... Dont have such a shop but thanks for the info ... Think will installl the bare block and then all the rest will be attached in place .. which sounds more practical to me... Are there any particulwr hints n tips one should follow when doing such re-installation?Comment
-
I'm used to dropping engines into freshly painted engine bays. As such, the paint and metal needs to stay scratch and dent free. The assembly plant uses an operation that I described to ensure the preservation of the body and paint. In short, the less intervention the more likely fewer things can go wrong.
On a sub-assembly line, workers marry the correct engine/trans and they complete a 'final dress'. All the components are totally exposed for easy accessibility and in plain view.
If you are already predisposed with your mind made up, why are you asking for a better or different way to drop your engine? Your method restricts assembly, forcing you to fight the starter motor, exhaust manifold bolts and other component installations as you lean over fenders with heavy cast iron parts. But hey, it's your car to do with as you like. Good luck. - DaveMember, Sons of the American Revolution
CLICK HERE to see my custom hydraulic roller 390 FE build.
"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
From: Royal Oak, MichiganComment
-
Hmm thats kinda true as well.. no im just trying to seee whats best dont feel offended i really appreciate your ideass greatly gratefull buddyComment
-
When I put the block in by itself I put the starter in first. Without the heads in place it's simple. Then I bolt the exhaust manifolds to the heads and put them in next. They are heavy but I've done it that way many times. Next is the intake manifold and then all the ancillaries. Yes, It's easier to bolt everything outside the car and put it in as a unit but since I'm usually doing it by myself I feel I can maneuver the bare block easier than the entire thing. Do whatever you feel more comfortable with.
JohnJohn Pizzi - Squarebirds Administrator
Thunderbird Registry #36223
jopizz@squarebirds.org 856-779-9695
https://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htmComment
Comment