Originally Posted by cdhowell
Unless you are the original owner and know nothing has changed then no. Should be 28 spline small bearing.
Hi cdhowel, I'm not original owner so you are correct it could have been changed. I did check ratio with code and that was right on. Now it does have the 3 chamfered holes on outside of axle, I know that 67 & up that's a 31 and axle with center cut out is 28, but I have been told that it doesn't apply to before 67 and that 59 bird stock is 28. I just didn't want to pull it out of winter storage and pull axle. It all looks original but as you said over the years anything is possible. Thanks for your help Tommy"