View Single Post
Old 12-30-2017, 03:51 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
Join Date: May 26 2009
Posts: 7,635
simplyconnected is on a distinguished road

Your switch is good, the fuse is good and they are working correctly. At the dash, the black wire (from the fuse) feeds the switch. Power comes out of the switch as RED or ORANGE (for Hi & LO speeds).

The short BLACK WIRE ON THE MOTOR goes to ground through a bullet connector, to complete the motor's electrical path. I suspect this BLACK wire is not bonded to ground properly. Either the bullet connector is not right or the wire is loose to ground. - Dave
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote