View Single Post
  #1  
Old 01-23-2016, 10:34 PM
Hazegray53 Hazegray53 is offline
Apprentice
 
Join Date: Jan 9 2015
Posts: 54
Hazegray53 is on a distinguished road
Default Scarebird disk brake install problem

I'm installing the scarebird setup on my 1960 Sunliner. I bought the parts that are listed on their parts list. 68-69 mustang rotors (raybestos part# 6006), and 83-92 s10 calipers (raybestos part# rc4125 and rc4126). The problem is, once I get it all installed it looks like the outside brake pad will never make contact with the rotor. And, the inside pad is right up against the rotor with the piston fully retracted. I have the spacer that came with the brackets installed and it seems like the rotor is in the correct position. I'm not sure if I'm just doing something wrong or have the wrong parts. Please help! If you have any suggestions.
Reply With Quote