View Single Post
  #11  
Old 11-26-2014, 01:40 AM
jopizz's Avatar
jopizz jopizz is offline
Excellent Auto Mechanic for over 40 years.
 
Join Date: Nov 23 2009
Posts: 4,744
jopizz is on a distinguished road
Default

The thin red wire on the left side of the relay is power from the ignition switch. You should have 12V there with the ignition switch either in the ON position or the ACC position. The front post is powered by the starter solenoid and should have 12V all the time and the post on the right is the output to the window switches. The way you have it jumpered it could be a bad relay or you are not getting 12V from the ignition switch. Put a test light or voltmeter on the left post and turn the key on. If you have power then the relay is bad. If no power then the ignition switch or wiring is bad.

John
__________________
John Pizzi - Squarebirds Administrator
1959 Convertible

Thunderbird Registry #36223
jopizz@verizon.net 856-779-9695

http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote