Dave may be on to the problem. I will look at my stock set of spindles in the shop and see if I can make a determinaion on the stops. Eric what is rubbing? is it the inner dust shield against the rotor and is it at the bottom of the shield or can you tell? My scoops are rubber and pop right out so if that is the problem I can rectify it.
Ps one thing leads to another. Went to put the self adjusters on the back and didn't like the job a shop had done on the brakes. I now have new drums, brake shoes, all the springs, while you have it apart led to new axle bearings and seals. But hey I know what is in there now.
NCbird on the Coast of NC
"Dads Bird" for my father