View Single Post
  #3  
Old 06-21-2010, 09:44 PM
jackbird60 jackbird60 is offline
Experienced
 
Join Date: Nov 28 2008
Posts: 124
jackbird60 is on a distinguished road
Default

I do the caps, for people like me with bad eyes. Didn't know that was yelling!

Anyway, I did a test similar to Dave test that I saw at this URL:

THIS TEST THE VR


http://www.vintagejeepparts.com/PDFs...REGULATORS.pdf

i made a 10 ga jumper wire from the ARM to the BAT terminal. then made another jumper wire, and it says to touch the Field to the arm. All wires connected.

Upon jumping the arm to the batt, the Gen light goes off, but I am only getting about 10 volts. Then jumping the Field to the Arm, there was no change. Even upon acceleration.

My guess is the 2nd generator is bad as well.

Any thoughts?

Jack
Reply With Quote