Thread: Electric Locks
View Single Post
  #2  
Old 09-01-2008, 10:57 PM
Petrolhead Petrolhead is offline
Experienced
 
Join Date: Jul 2 2007
Posts: 403
Petrolhead is on a distinguished road
Default

Hi

I went the whole hog on my '62 and shaved the door handles. I used an Autoloc kit, that has all the solenoids/relays/remote etc.

Wasn't difficult, took a weekend. Mounted solenoids so that the cable had a direct downward pull on the door latch mechanism. there wa sno place to drill and thread the cable through, so I welded a lever to the latch mechanism and ran the cable to that.

Mounted the receiver for the remote up in the passenger's side kick panel area.

Fitted concealed push buttom switches directly wired to the solenoids, so that the doors can still be opened if the remote fails.

I'll post some pics shortly

And specific questions please ask, but the '62's door latches are different to your car's.
Reply With Quote