View Single Post
  #5  
Old 12-10-2006, 08:21 PM
bcomo bcomo is offline
Super-Experienced
 
Join Date: Sep 24 2005
Posts: 1,224
bcomo is on a distinguished road
Default RE: Starter Removal - 60 HT with 430

>Hello I'm not sure but you might have to drop the H pipe.
>Not a fun job. Or try and take the drive off before you pull
>it out? just a thought. I'll see what the manual says and
>get back to ya. Take
>care.....................................Bill


We looked at taking the H pipe off. It looks like the stud on the manifold might block the starter. So, the manifold might have to come out too. Can't tell for sure.

That's the problem, no one that I know has done it before. Someone out there must have done this, and hopefully will respond with what needs to happen. My 60 shop manual says nothing about removing anything to get the starter out.

Thanks for the help Bill.
__________________
Bart
1960 Hard Top/430
Thunderbird Registry Number 1231
Reply With Quote