Originally Posted by sagembox
The noise is still present!
The new bushings went in very easy, when i watch several videos on youtube it seams to me that there must be much more force to put push Thema in ,than i used. Can i weld the bushings to the control arm to get a strong connection between the parts? I saw this solution also on the i-net.
Another question, must there be an isolator between the coilspring and the lower control arm? I believe the scratching sound comes from there, is this possible?
The bushings are pressed in. If they went in easy either you have the wrong bushings or your arms are worn.
There's no isolater between the spring and the lower control arm.