View Single Post
  #3  
Old 09-24-2017, 12:28 PM
BEVS BIRD's Avatar
BEVS BIRD BEVS BIRD is offline
Newbie
 
Join Date: Oct 1 2016
Posts: 21
BEVS BIRD is on a distinguished road
Default Abs Brake Kit

HI DAVE...Yes .STOCK SPINDLES....FRONT mntd calipers/brkts/ and rotors, bearings /seals and hardware were supplied by ABS. Along with M/Cyl and related... THEY DO NOT SUPPLY COMBINATION VALVES so I bought a PV2K-1 KIT ....The booster package with their offset booster brkt fit great, with only slight tweaking needed. So... yes, I used combo valve/residual valves {2# front and 10# rear} ,all new brake lines etc in the brake upgrade. I found ABS VERY un co-operative with any info such as M/Cyl bore size, caliper make or brk pad part numbers.. THIS SET UP WORKS VERY WELL but at the start,,after reading this forum about the disc conversion..I was so overwhelmed by the amout of info I went looking for a fool proof kit..And was guided to ABS by this forum...NO WAY will I remove sway bar..These big boats need all the help they can get.. in 20 20 hind sight REAR MNTD calipers would be the smart set up..with readily avail S-10 stuff THNX FOR THE INPUT DAVE CHEERS TERRY
Attached Images
File Type: jpg IMG_2786 (1).jpg (371.9 KB, 129 views)
File Type: jpg IMG_2791.jpg (344.3 KB, 132 views)
File Type: jpg IMG_2979.jpg (338.6 KB, 129 views)
File Type: jpg IMG_2980.jpg (312.6 KB, 127 views)
File Type: jpg IMG_2982.jpg (339.3 KB, 128 views)

Last edited by BEVS BIRD : 09-24-2017 at 12:38 PM. Reason: spelling
Reply With Quote