Sitting for 20 years has taken it's tole on many of the seals.
Right now I have a huge steering fluid leak. Looks like it's coming from the end of the ram and the control valve.
The control valve appears to be "new". Looks like it was replaced shortly before the car was parked.
The steering system is working properly, just leaking a lot.
I'm going to rebuild the ram and the control valve. Seems this site has everything I'll need.
The question is, what should I expect when I take the control valve and the ram apart.
I think the ram should be straight forward, I'm concerned about taking the control valve apart.
Any thoughts on these procedures is greatly appreciated.