View Single Post
Old 07-15-2017, 10:43 AM
Joe Johnston Joe Johnston is offline
Join Date: Dec 23 2008
Posts: 689
Joe Johnston is on a distinguished road

Not needing a faster warm up, or heater, I would go with a spacer. BUT FIRST, I would use a good penetrating oil on both sides to try and free it up over a couple of days. Oil and a couple of raps with a hammer may be all you need. Once open, a bit of wire will keep it that way. My method may be crude, but easier than fighting rusty exhaust nuts and studs.
Reply With Quote