I haven't removed the steering wheel yet as I only want to do that one time. I haven't changed the position of the steering wheel, but I had it out last year when rebuilding the column. The turn signal never worked to my satisfaction not including the lousy new replacement lever from Mac's which even Teflon tape or a lock washer won't make tighter.
I will say the lever holds, but it cancels easy with 1/8th turn of the wheel. That's why as I drive to the turn, the signal cancels. Does this mean my C-Clip is 180* out of position? I looked at a photo I took and the open end faces the lever. Can I turn that w/o taking the clip off entirely?