Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1960 To 1970 American Ford Falcons - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=28)
-   -   Help, please. (http://squarebirds.org/vbulletin/showthread.php?t=3168)

raptor1962 08-22-2007 12:43 AM

Help, please.
 
I am in the process of purchasing an early Falcon, a 62, and I would like to convert the 4 bolt wheels over to a standard 5X4.5 pattern. What are my options?
Also, I want to build a 302 and C-6 for in it, as there is currently no engine or tranny in the car. What modifications are necessary for this install?

Alexander 08-22-2007 09:18 AM

The early Mustangs were based on the Falcon, so it should be no problem getting 5-bolt drums or discs for your Falcon.

Hawkrod 01-07-2008 12:55 PM

Your options are actually pretty open as Falcons are very popular. The parts you need are pretty readily available but can be pricey. The Mustang is based on the early Falcon as noted but it is really based on the 64 Falcon which won't help you too much. What you need are motor and trans mounts from a 63-65 V8 Falcon and rear end from a 63 V8 Falcon which are out there. The front brakes can be updated using Mustang stuff or 63-65 V8 Falcon stuff. Hawkrod


All times are GMT -4. The time now is 07:00 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.