replacing steering coupler on 1979 tbird
I need to replace the steering coupler (rag joint) on my 1979 tbird. I do not have a shop manual. How do I go about doing this?
If it's like most Fords you have to remove the two nuts that hold it to the steering shaft. Then loosen the lock bolt that holds it to the steering gear. You will probably have to loosen the steering column to get enough play to remove the old joint and insert the new one. It's not very difficult.
|All times are GMT -4. The time now is 08:04 PM.|
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.