Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1958 To 1960 Squarebirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=14)
-   -   carby (http://squarebirds.org/vbulletin/showthread.php?t=21416)

eddy blackstar 03-25-2017 07:27 AM

carby
 
hi my carby floods when i go up hill or around corners. i have a carby rebuild kit with floats on the way.i have a 1958 shop manual and in the photo page 1-69 fig22 accelerating pump operating rod installation is in position 1 on my carby it is in position 4 i have all original 1960 352 cruise o matic.should i change it to position 1 or leave as is when i do the rebuild?
thanks eddy

jopizz 03-25-2017 11:26 AM

The normal position varies on your climate. In warmer weather you want it in position 1 or 2. In colder weather position 3 or 4. The 1960 shop manual shows the summer position as 2 (second from the bottom) with the rod in the outside hole of the accelerator pump lever. That's where I would put it in your case.

John

eddy blackstar 03-25-2017 07:25 PM

thanks john .
sounds good as where i live is always mild


All times are GMT -4. The time now is 07:00 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.