Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1961 To 1963 Bulletbirds, Rocketbirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=24)
-   -   C8AP-7006C tranny code (http://squarebirds.org/vbulletin/showthread.php?t=21233)

booalou 01-17-2017 10:43 PM

C8AP-7006C tranny code
 
My 62 tbird reverse gear has went out and I debating on getting rebuilt or replacing it. One of my issues is the code that's on this transmission. It doesn't appear to be a cruise o matic but a 68 version of the C6. Does anyone know how to make sense of these numbers and letters?

jopizz 01-17-2017 11:47 PM

It should be C8AP-7003-C. According to the Ford parts book it is a C6 with a column shift used in a 1968 Full Size Ford with a 428 engine and a 2.80 rear axle gear. Identification code PGB-F1.

John

YellowRose 01-18-2017 12:07 AM

C8AP-7006C tranny code
 
C8AP-7006C C=1960's, 8=1968, A=Full Sized Ford, an S would have meant it was from a Tbird. P=Automatic tranny. 7006=basic number for an automatic tranny main case, C=May indicate an engineering change. What I can't tell you is if it is a FMX, a C4 or a C6 or whatever it might be. Other tags on that tranny might tell you the codes for it. It might be a C6. If it has other tags on it tell us what they say.

http://automotivemileposts.com/ford/...rtnumbers.html

booalou 01-18-2017 12:22 AM

E7TP-7006CA transmission code
 
Will a E7TP-7006CA fit as a replacement tranny for the C8AP-7006C?

YellowRose 01-18-2017 01:28 AM

C8AP-7006C tranny code
 
Bob that E7TP-7006CA is a 1987 T=Truck, P=Automatic or possibly a Bronco tranny. I do not know the answer to that question but maybe Dave ~ simplyconnected, or John ~ jopizz will and can answer it.

booalou 01-18-2017 11:33 AM

I hope they can help
 
I hope Dave ~ simplyconnected, or John ~ jopizz will and can answer it.

jopizz 01-18-2017 12:03 PM

Even though it's a C6 that trans is made for a small block not a big block. I'm not sure if the bell housing is the same or what internals are used. If you check transmission sites it doesn't look like they are interchangeable. I would look for a big block C6 or just get yours repaired.

John

booalou 01-18-2017 12:24 PM

I got my answer
 
Thanks for all the help. The tranny is not for my big block. So I guess ill have to fork out the big bucks to get mine rebuilt or I might try to adjust the belts to see if that resolves the issues.


All times are GMT -4. The time now is 01:58 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.