Replacing original horns.
Does anyone have a better way of removing and replacing the original horns on my brothers 1964 Thunderbird?
This sounds like an easy project but I have found nothing is easy on this car. The original (snail style) horns can not be removed from above or below. If the car did not have AC I might have been able to remove them from the bottom (no AC radiator).
The only way I figured to remove them was to remove the grill. Unfortunately the guards are in the way. I tried to remove one of them. I was able to remove the bottom bolt but the middle bolt is just spinning around without it coming loose. Thank you for your time.
If you can't get them out then just install two replacement horns in another location. Most new horns are much smaller than the originals so they are easier to hide.
I already bought and received two new (snail styled) horns. Someone mentioned to me about loosening the whole bumper so that I can remove the horns. I'm going to try that tomorrow because the bumper guards are not budging. Thanks.
|All times are GMT -4. The time now is 01:52 PM.|
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.