Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1961 To 1963 Bulletbirds, Rocketbirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=24)
-   -   Interior Door Handle Removal (http://squarebirds.org/vbulletin/showthread.php?t=20899)

PC1963T-Bird 09-17-2016 11:40 AM

Interior Door Handle Removal
 
I'm trying to re-mediate a couple issues and I need to take the interior drivers side door panel off. I've removed all the screws and I bought the tool to help remove the handle. I know there is a clip that this tool is supposed to help remove so the handle comes off. I also know that the tool needs to be inserted along the length of the handle.

I still can't get the handle off. Is there a special move I need to do? Or does this tool simply move the clip out of the way so you can pull the handle off?

Joe Johnston 09-17-2016 11:48 AM

Its a bit tricky the first time or two you do it. I've often found it easier to slide a shop rag between the handle and the interior door panel and try and catch the open end of the clip and pull it off the handle. If you are lucky you can push the door panel in far enough to see the clip and make it self explanatory.

simplyconnected 09-18-2016 05:12 AM

The clip is an "E" configuration. There are different size tools so don't get one for a GM car.

The idea is, like you said, along the handle, slide the tool in and catch BOTH ends of the 'E' clip. As you push, the clip will expand. It might even come off, which is ok.

Trouble comes when you have only one side of the clip off because the remaining end will still hold the handle on the spline.

If you have a spare (or new) handle, put the tool up to the clip and notice how it works. Some handles have a plastic 'washer' between the door panel and handle. This saves the door vinyl but you need to insert the tool between the plastic washer and chrome handle.

CLICK HERE for a YouTube video.


All times are GMT -4. The time now is 03:05 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.