Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   1961 To 1963 Bulletbirds, Rocketbirds - General Technical Discussion (http://squarebirds.org/vbulletin/forumdisplay.php?f=24)
-   -   Windows not meeting (http://squarebirds.org/vbulletin/showthread.php?t=20859)

PC1963T-Bird 09-05-2016 06:30 PM

Windows not meeting
Hi there.

On my 63 I'm having a heck of a time trying to figure out why my drivers side windows don't meet up and "seal." If you look at the pic, you can see the gap. The drivers door looks pretty much lined up so I'm thinking it's the rear window that needs to be adjusted? It has power windows and it seems they go all the way up?

jopizz 09-05-2016 08:32 PM

1 Attachment(s)
There is a stop that has to be adjusted so the quarter window lines up correctly. You need to remove the quarter trim panel to get access to it. If that doesn't fix it you may need to adjust the regulator equalizer bracket.


emeraldgt 09-05-2016 11:57 PM

My 63 does the same thing? If I close the door and hold the drivers door window (not a great thing to do) it meets the rear quarter seal correctly. On mine it appears the top window seal on the drivers door was replaced and it does not fit correctly, pushing the window out. It is on my list of things to take apart.

All times are GMT -4. The time now is 01:35 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.